Menu Bar

Please select Country:

Menu Bar 2

Back

Crane Operator

Features

Go to SST - VCOC-10 Video Crane Operator - Conventional™


SST - VCOD-10 Video Crane Operator - Digital™

* This Video Crane Operator - Digital™ software product is currently only be supported by
   'Lenz Digital Plus' and Roco Digital' model of Digital Command Control system in
   'XpressNet' Data Interface Communication format.

   Lenz Logo    Roco Logo

   The other models of DCC are being developed to interface with the Video Crane Operator - Digital™
   software product.

* A USB - Video-captured adapter is needed to be included with this software product.

* A maximium of 4 simulators/computers (1 simulator on each computer) are allowed to be used because
   there are only 4 channels available on the camera transmitter/receiver unit.

* The Joystick or Gamepad options can be used to control the Video Crane Operator - Digital™
   software product.

Diagram is to be shown soon !

Pre-Model Crane Operator Settings
  • Crane Code/Number & Crane Type Selection
  • Video Capture Type Selection – either PC, TV or PC & TV
  • Micro Video Camera Power Type – either powered by
      - Crane or Function Decoder (recommended for a full time power),
      - Battery or
      - Another power source
Model Crane Operator
  • Views of drivable cranes including
      - train, coaling, gantry, container, overhead loading, construction
  • Crane Cockpit/Compartment, Console & Controls, and the Video captured image is displayed on the windscreen area
  • Crane console - Left or Right hand side position and control type selection
  • 1 or 2 Joystick knobs : Hook - Up & Down, Jib Up & Down and Crane Rotation - Left & Right Function
  • Emergency Stop & Reset Button
  • Day/Night Driver Compartment Light Off/On function
  • Function Buttons – Electromagnet, Working light, Excavator shovel & other optional functions
  • Speed Step Settings (14, 27, 28 or 128)
DCC Interface & Connection Settings
  • A DCC Control system and a PC interface unit or module is required
  • COM Port Selection – Up to 20 COM Ports using either
      - Serial,
      - USB 1.1 or
      - USB 2.0
      (Serial-USB adapter is highly recommended for the best performance & it is supplied separately)
  • Baud Rate Selection (Ranges from 9600 to 115200 kb/s)
  • COM Port & Baud Rate Memory/Save Function
  • Interface type (At present, it supports Lenz Digital Plus DCC only - LI100, LI100F LI101F & LI-USB. Other DCCs are to be developed soon)
Video Capture & Settings
  • A Video Capture adapter is required (supplied separately)
      Availability - either USB 1.1 or USB 2.0
      with Composite Video or S-video input & Software - Driver
  • Supports NTSC, PAL, SECAM input system
  • Video captured in either MPEG1 or MPEG2 formats (depending on the type of Video capture adapter)
  • High video resolution up to DVD quality
  • Support resolution up to 720x480 (NTSC) / 720x576(PAL) with the use of USB 2.0 video capture adapter
  • Preview on full windscreen area or image size adjustable
  • Do not require a Webcam to start the Video Capture system
Computer System Requirement
  • Pentium IV 2.4 GHz CPU or up or AMD 2400 or up (with hyper-threading would give the video capture better performance)
  • USB ports: 1.1 or 2.0 (2.0 recommended)
  • Hard Disc Drive (speed 7200 rpm)
  • Graphic card with 64MB memory or up
  • Sound card
  • 512MB main memory (RAM) or up
  • DirectX 8.1 or up (DirectX 9.0 recommended)
  • Window XP

    Price of all products can be found on the Order page !


SST - VCOC-10 Video Crane Operator - Conventional™


* This Video Crane Operator - Conventional™ software product will be compatible with any model crane
   without a decoder. It will be supported by any Conventional crane or train system.

* A USB interface Conventional Crane Controller/Device is included only with this
   Video Crane Operator - Conventional™ software product.

* A USB - Video-captured adapter is needed to be included with this software product.

* A maximium of 4 simulators/computers (1 simulator on each computer) are allowed to be used because
   there are only 4 channels available on the camera transmitter/receiver unit.

* The Joystick or Gamepad options can be used to control the Video Train Driver - Digital™
   software product.

Diagram is to be shown soon !

Pre-Model Crane Operator Settings

  • Crane Code/Number & Crane Type Selection
  • Video Capture Type Selection – either PC, TV or PC & TV
  • Micro Video Camera Power Type – either powered by
      - Battery or
      - Another power source
Model Crane Operator
  • Views of drivable cranes including
      - train, coaling, gantry, container, overhead loading, construction
  • Crane Cockpit/Compartment, Console & Controls, and the Video captured image is displayed on the windscreen area
  • Crane console - Left or Right hand side position and control type selection
  • 1 or 2 Joystick knobs : Hook - Up & Down, Jib Up & Down and Crane Rotation - Left & Right Function
  • Emergency Stop & Reset Button
  • Day/Night Driver Compartment Light Off/On function
  • Function Buttons – Electromagnet, Working light, Excavator shovel & other optional functions
  • Speed Step Settings (14, 27, 28 or 128)
DCC Interface & Connection Settings
  • COM Port Selection – Automatic selected using either
      - USB 1.1 or
      - USB 2.0
Video Capture & Settings
  • A Video Capture adapter is required (supplied separately)
      Availability - either USB 1.1 or USB 2.0
      with Composite Video or S-video input & Software - Driver
  • Supports NTSC, PAL, SECAM input system
  • Video captured in either MPEG1 or MPEG2 formats (depending on the type of Video capture adapter)
  • High video resolution up to DVD quality
  • Support resolution up to 720x480 (NTSC) / 720x576(PAL) with the use of USB 2.0 video capture adapter
  • Preview on full windscreen area or image size adjustable
  • Do not require a Webcam to start the Video Capture system
Computer System Requirement
  • Pentium IV 2.4 GHz CPU or up or AMD 2400 or up (with hyper-threading would give the video capture better performance)
  • USB ports: 1.1 or 2.0 (2.0 recommended)
  • Hard Disc Drive (speed 7200 rpm)
  • Graphic card with 64MB memory or up
  • Sound card
  • 512MB main memory (RAM) or up
  • DirectX 8.1 (DirectX 9.0 recommended)
  • Window XP

    Price of all products can be found on the Order page !


iTrainDriver Logo

Conditions of use

All Rights reserved


© SwanSoft Technologies 2005 - 2014